How to Magnum to 300C door Panels

[Santi]

Ok guys first before i get unto how to do this properly without losing your cool like i did i want to thank a few people
Dave ( Magmania ) for helping me out with the interior your the best bro
Ross (green King ) for the sale i love them man
& Chris ( Hellsfire ) thanks for your over the phone help bro i wouldve ended up breaking my fist from getting to upset lol.


Ok so here we go


step 1:

Remove all the door panels by popping off all the fasteners and screws




with the fasteners its best if u use a flat tip screw driver and press lightly till it pops in do that to all of them and then pull on the panel and they will pop out.

Step 2:
unhook the lock bar that attaches to the door handle.



This is what you are left with



Now that red lockbar ( which is what i call it not its technical term ) is what you need to replace in order to have the 300C door panels to fit. with out this it will not bolt on . You can get these from you local dodge dealership for only 12 bucks each i know a little expensive but good luck finding them any where else.

step 3:

To take these off you need to take off the lock mechanism that attched to the door do so by taking off these 3 bolts
FRONT:



BACK :


After taking the front off you can slowly push the lock back far enough so you can get your hands in there and work it.



With the rears you have to move a certain bar thats in your way. It guides the window so make sure u put it back lol



Once you take those off and replace them with the 300 lockbars
you can then go ahead with the rest of the install


Front



REAR