ABS/Firewall covers

[Big D]

Mark builds some real nice high quality dress up covers for our cars and he is a stand up guy to deal with too. I love my abs cover & firewall ,they fit and look great!!!,D

[TxTwiStr09]

Pictures always help to seal the deal....do you have some of yours?

BTW, I agree with your assessment!

[GO-SRT-GO]

Do you have a firewall cover for the 6.1 SRT? Will it work with a strut tower brace installed?

I figure since I am picking up an ABS cover, I might as well look into a firewall cover.

[TNCarCraft]

I've got a firewall for the 5.7L. And it needs to be used with the engine cover, not half covers. Will not work with the Techno Strut tower brace

I've got a 3.5L firewall that needs a final tune-up.

No 6.1L firewall cover

[Big D]

See pics here: http://www.cencallx.com/forums/membe...ewall-mod.html


This is the only way I know of to make Marks firewalls work with strut braces that use bolts that tie into the factory rear cross brace(i.e. Mopar & Techno). 1) Unbolt your strut brace and locate firewall as it will be installed w/ the supplied screws. 2) You have to match drill holes(carefully)through the firewall from your brace. 3) Remove the factory rear cross brace and tack weld the nuts (from the strut to brace bolts) to back of the brace. 3) Re-install factory rear cross brace. 4) Perform a final test fit of firewall with all screws and bolts installed, make adjustments as needed. 5) Remove firewall, prep for paint, paint. 6) Perform final install of firewall and brace with all hardware. WARNING:this may or may not work with your particular strut brace, Always check fit & clearances first before performing any mods to the firewall or factory rear cross brace. D.